Brand New – HM Digital DM-1 (with two 1/4» Tees) Inline Dual TDS Monitor *** Check out more HM Digital Products (Click Here)*** Check out HM DM-1A 3/8″ Tees and HM DM-1B for 1/2″ Tees.Measure the tap water coming in vs. the purified water going out of your system at any time. Use the monitor to determine when the filters need to be changed. Install the meter for your customers so they’ll always know how their system is performing. FEATURES Displays TDS levels of the feed water and product water with in & out electrode probes.Highly efficient and accurate due to its advanced microprocessor technology.Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. Dual Range 0-9990 ppm (From 0 – 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking ‘x10’ image.) Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Comes equipped with John Guest Quick-Connect T-fittings as shown. Installs quickly and easily. SPECIFICATIONS Range: 0-9990 ppm Accuracy: ±2% Cable Length: 24.5″ (including sensor) Fittings: Two 1/2″ Tee Power source: 2 x 1.5V button cell batteries (included) Battery life: approx. 1000 hours of continuous use Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.) Weight: 79.4 g (2.8 oz.) Check out more HM Digital Products (Click Here)
HM Digital SM-1 In-Line Single Water TDS PPM Monitor Mter/Tester, 1/4″ Tee
HM Digital SM-1 In-Line Single TDS Monitor, 1/4″ Tee, SM1Authorized HM Digital Distributor – Brand new meter with One-Year Warranty.Check out more HM Digital Products (Click Here) FEATURES Displays TDS level of a single water line. Highly efficient and accurate due to its advanced microprocessor technology. Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. Wide Range 0-9990 ppm (From 0 – 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking ‘x10’ image.) Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Comes equipped with John Guest Quick-Connect T-fitting (1/4 inch standard). Installs quickly and easily. NEW PRODUCT! Measure the product water at any time. Use the monitor to determine when the filters need to be changed. Ideal for any water filtration system, including reverse osmosis systems, coolers and much more. SPECIFICATIONS Range: 0-9990 ppm Accuracy: ±2% Cable Length: 24.5″ (including sensor) Fittings: 1/4″ standard, also available with 3/8″ or 1/2″ Power source: 2 x 1.5V button cell batteries (included) Battery life: approx. 1000 hours of continuous use Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.) Weight: 79.4 g (2.8 oz.) Looking for other HM Digital Meters/Monitors/Tee Fittings? Check out the HM Digital Meters (Click Here), Best-Price-Anywhere Guaranty!
HM Digital DM-2EC: Commercial Inline Dual EC Monitor
Inline ELECTRICAL CONDUCTIVITY monitor that can be installed on industrial water filtration systems such as car washes, window washing, manufacturing, and food processing. FEATURES Highly efficient and accurate due to its advanced microprocessor technology. Displays EC levels of the Feed Water and Product Water with in & out electrode probes. Auto-Off function conserves battery power. The unit shuts off automatically after 3 minutes. Dual Range – Measures from 0-999 µS, with a resolution of 1 ppm. From 1000 to 9990 µS, the resolution is in 10 µS increments, indicated by a blinking ‘x10’ image. Factory Calibrated :calibrated to 1413 µS. The DM-2EC features digital calibration. Diagnostic error messaging Shielded sensor cables Comes equipped with 1/4 inch Mur-lok® Quick-Connect T-fittings. Also available with 3/8″ or 1/2″ fittings. Installs quickly and easily. Differences from the DM-1: Measures EC (Electrical Conductivity) in µS (micro-Siemens). Designed for commercial/industrial applications. Stronger, water-resistant casing. Digital calibration can be done individually on each line. Improved design, including an extra large, easy-to-read LCD display. Longer, waterproof, shielded cables. Variable mounting bracket. SPECIFICATIONS Range: 0-9990 µSAccuracy: ±2% Cable Length: 46″ (including sensor), shielded cablesSensor: Dual, 1/4″ diameter for quick-connect fittings (model SP-3, included)Digital Calibration: Digitally factory calibrated to 1413 µS. Re-calibration can be done separately for each line. Power source: 2 x AA batteries (included) Battery life: Approx. 2 years Size: 11.6 x 6.8 x1.8 cm (4.6 x 2.6 x .7in.) Weight: 201.3 g (7.1 oz.)
