Geekpure 4 Stage Portable Aquarium Reverse Osmosis Water Filtration- DI Filter
Specifications
| Return Shipping Will Be Paid By | Seller |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Compatible Brand | For Geekpure |
| Color | White |
| Compatible Model | For Geekpure |
| Number Of Filtration Stages | 4-Stages |
| Filtration Method | Reverse Osmosis |
| Item Depth | 14.8 in |
| Contaminant Removal | Chlorine Taste & Odor |
| Suitable For | Commercial |
| Brand | Geekpure |
| Type | Water Filter |
| Manufacturer Warranty | 1 Year |
| Item Height | 5 in |
| Model | RO-100G-4 |
| Country/Region Of Manufacture | China |
| Item Width | 9.2 in |
| Item Weight | 4.8 Pounds |
Work Condition : FEED WATER PRESSURE:40 - 100 PSI (If less 40 psi, we must to add booster pump ,or else, you can not get any pure water); TEMPERATE:40-110°F/5-45°C; PH:3.0 -11.0; MAX. TDS :1000 PPM; TURBIDITY < 1.0 NTU; MAX SDI <4.0; HARDNESS < 5 GPG; IRON <0.1; MANGANESE <0.05; Shelf life: 3 Years Smart Size Product Dimension:Length 14.80 inch, Width 9.2 inch, Height 3.2 inch Product weight:4.8 lb Perfect for apartment, RV's, business travel, vacation, yacht, boat, Mobil home or anywhere you need the pure water High Efficient It reduce Total Dissolved Minerals,Arsenic,Lead,Mercury,Fluoride,Cadmium and more. Pure water capacity : 100 gallons per 24 hours.Test condition : feed water pressure: 70 psi. work temperature: 77 F or 25 C. Nacl concentration: 250 ppm. recovery: 15%. Different work condition, water capacity is different. Tankless No electric ! No tank ! No faucet ! NO PLUMBING REQUIRED! Easy to install and replace filters. Note: There is not tank ,faucet, and high/low pressure switches,The system can not work on and off automatically. If you want to add tank,faucet,switches, please contact with seller. More valuable information: Q: What is dimension of installed Geekpure RO-100G-4 system? A: RO unit: Length 14.80 inch, Width 9.2 inch, Height 3.2 inch. 4.8 lbs. Q: What is 4 stage filter and function? A:The 1st stage: PP spun filter, Reduce sand, dirt, sediment. The 2nd stage: Carbon filter, Reduce chlorine, taste & odors, very fine particulates The 3rd stage: The 3rd stage:TFC Ro membrane, Reduce total dissolved minerals, Arsenic, Mercury, Iron, Lead ,Fluoride and more. The 4th stage: DI filter reduce total dissolved minerals after RO water. Q: Where can I buy replace filters? Replacement Filters Set Q: What is in the box? A: 1 RO unit, diverter valve, 1 piece wrench, RO tubes, clips, drain clamp, teflon tape, and so on. NOTE: 1.It Is Recommended to Wait Until the Entire System Is Pressurized and Re-Check for Any Leaks Before Leaving Installation Site. Push the Tubing All the Way in and Use Teflon Tape During Installation. 2.Please keep flush filters 30 minutes before it is used to feed for your aquarium .It Is Normal for Some Black Carbon Fines to Appear When You Flush Carbon Filter.There is not tank and faucet, and high/low pressure switches,The system can not work on and off automatically. If you want to add tank,faucet,switches, please contact with seller. NOTE: 1.The system can not work on and off automatically. 2.The flow rate is very less not same as tap water. that is about 4.2 gallon pure water per hour and under this work condition:feed water pressure: 70 psi. work temperature: 77 F or 25 C. Nacl concentration: 250 ppm. recovery: 15%. Different temperature,different water pressure and feed water quality, the product water capacity and pure water quality is different.That is reason we feel low pure water capacity in the winter, but higher in the summer. 3.The pure water can not store more than 1 day. you open the feed water valve when you need water. If you accept above 3 points, you can use it at anywhere. Geekpure 4-Stage Reverse Osmosis drinking water filtration system is special design for aquariums, laboratory testing, and other applications where ultra-pure water is necessary.
