100% PP Polypropylene for compatibility with a wide range of process fluids. Maximum Flow Capacity: 1-6 GPM. Total 25 filters, all filters are individually wrapped.
25 Pack Whole House Sediment Water Filter Cartridge 1 Micron size 20″ x 2.5″
1 set of replacement filters with following : 25 x 1 Micron Polypropylene Sediment Filter Three-layers structure cartridge, High contaminant holding capacity. 100% PP Polypropylene for compatibility with a wide range of process fluids. 1 Micron , Micro-Denier™ melt-blown filtration fiber, high removal ratings. Formed by thermal bond without use of any binders and adhesives. Maximum Operating Pressure: 125 PSI Operating Temperature Range: 40-100°F Dimensions: 20 inch x 2.5 inch Maximum Flow Capacity: 1 – 20* GPM This Filter pack available with different pack with 5 microns 1 pack 192717297081 2 pack 202496174393 4 pack 202496174125 6 pack 192717375517 9 pack 323517395087 10 pack 323540411804 12 pack 202496834486 20 pack 323541488717
20″ x 2.5″ GAC CTO Sediment Filter Set Max Water RO
20 inch Slim Blue Filter Pack contains the following: 3x 5 Micron Polypropylene Sediment Filter Three-layers structure cartridge, High contaminant holding capacity. 100% PP Polypropylene for compatibility with a wide range of process fluids. 5 Micron , Micro-Denier™ melt-blown filtration fiber, high removal ratings. Formed by thermal bond without use of any binders and adhesives. Certificated by NSF42 and FDA CFR Title 21. (Not printed on the filter label) Maximum Operating Pressure: 125 PSI Operating Temperature Range: 40-100°F Dimensions: 20″ x 2.5″ Maximum Flow Capacity: 1 – 20* GPM 3x GAC UDF Coconut Shell Carbon Filter GAC 20″ Coconut shell Carbon Filter – Size 2.5″ x 19 7/8″ Remove chlorine, turbidity, bad taste & odors, sediment, dirt, and THMS from water. 100% coconut shell carbon filter media. 5 Micron Nominal filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operational Temperature Range: 40°F to 125°F Low pressure drop across filter stage. All filters are individually wrapped 3x CTO Carbon Block Filter Carbon Block Filter – Size 2.5″ x 19 7/8″ 5 Micron nominal filter remove small particles and carbon fines & to ensure 100% of chlorine removal from water. All filters are individually wrapped. Total 9 filters, each individually wrapped
Reverse Osmosis Water Filters Set : PP Sediment, GAC, CTO & Post Carbon
1 set of replacement filters with following: 1 x Sediment Filter 5 micron Dirt/Rust remover Size 9 7/8 inch x 2.5 inch – Fits most standard 10 inch size housings and most reverse osmosis systems.Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water. Meets FDA requirements for food and beverage contact. No leachable or extractable material to contaminate outflowing water. Long life and increased dirt holding capacity. No surface binders to reduce flow and increase change-out frequency. 1 x GAC 10 Inch Coconut shell Carbon Filter Size 9 7/8 inch x 2.5 inch – Fits most standard 10 inch size housings and most reverse osmosis systems. Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water. Thick Wall Coconut Base Carbon Filter Media – 100% coconut shell carbon Designed For maximum contact between the water and carbon. 5 Micron filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operation Temperature: 40°F to 125°F 1 x CTO Carbon Block Filter Size 9 7/8 inch x 2.5 inch Fits most standard 10 inch size housings and most reverse osmosis systems. Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water. 1 x Standard Inline Carbon Cartridges Dimensions: 2 inch x 10 inch – Fits standard Reverse Osmosis Systems – 10 Micron Nominal Removes Chlorine , Bad Taste & Odor ,Turbidity ,Sediment ,THMs and Dirt. Helps to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers Max Flow: 0.5 GPM Max Pressure: 125 PSI Max Temperature: 100°F Inlet/Outlet: 1/4 inch NPTF thread (fitting is required) Total 4 filters, each individually wrapped. Similar Replacement filter Pack with Better Price Pre and post Filter Set: (8 pack): 2 x sediment, 2 x CTO, 2 x GAC, 2 x inline carbon 201621502490 Pre and post Filter Set: (14 pack): 4 x sediment, 4 x CTO, 4 x GAC, 2 x inline carbon 322190243744 Pre and post Filter Set: (16 pack): 4 x sediment, 4 x CTO, 4 x GAC, 4 x inline carbon 192369361379 Pre and post Filter Set: (21 pack): 6 x sediment, 6 x CTO, 6 x GAC, 3 x inline carbon 191923460528 Pre and post Filter Set: (24 pack): 6 x sediment, 6 x CTO, 6 x GAC, 6 x inline carbon 191942271603 Pre and post Filter Set: (32 pack): 8 x sediment, 8 x CTO, 8 x GAC, 8 x inline carbon 202024862630 Filter cartridges should be changed every 6-12 months under domestic conditions. Filter life varies and depends on the water source quality. –> –>
12 x Max Water Whole House GAC UDF GAC Coconut Shell Carbon Filter, 20″x2.5″
1 set of replacement filters with following : 12 x GAC UDF Coconut Shell Carbon Filter GAC 20 inch Coconut shell Carbon Filter – Size 2.5 inch x 19 7/8 inch Remove chlorine, turbidity, bad taste & odors, sediment, dirt, and THMS from water. Thick Wall Coconut Base Carbon Filter Media // 100% coconut shell carbon Designed For maximum contact between the water and carbon. 5 Micron Nominal filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operational Temperature Range: 40°F to 125°F Low pressure drop across filter stage. All filters are individually wrapped Total 12 filters, each individually wrapped. This Filter pack available with different pack 1 pack 202496881505 2 pack 192718197441 4 pack 192718209637 6 pack 192718219540 9 pack 323541595671 20 pack 202496919555
Max Water Whole House GAC UDF GAC Coconut Shell Carbon Filter, 20″x2.5″
1 set of replacement filters with following : 1 x GAC UDF Coconut Shell Carbon Filter GAC 20 inch Coconut shell Carbon Filter – Size 2.5 inch x 19 7/8 inch Remove chlorine, turbidity, bad taste & odors, sediment, dirt, and THMS from water. Thick Wall Coconut Base Carbon Filter Media // 100% coconut shell carbon Designed For maximum contact between the water and carbon. 5 Micron Nominal filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operational Temperature Range: 40°F to 125°F Low pressure drop across filter stage. All filters are individually wrapped This Filter pack available with different pack 2 pack 192718197441 4 pack 192718209637 6 pack 192718219540 9 pack 323541595671 12 pack 202496914860 20 pack 202496919555 Total 1 filters, each individually wrapped.
32 PK Reverse Osmosis Replacement Filters Coconut Carbon Inline Sediment GAC
1 set of replacement filters with following : 8 x Sediment Filter 5 micron Dirt/Rust remover Size 9 7/8 inch x 2.5 inch – Fits most standard 10 inch size housings and most reverse osmosis systems.Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water. Meets FDA requirements for food and beverage contact. No leachable or extractable material to contaminate out-flowing water. Long life and increased dirt holding capacity. No surface binders to reduce flow and increase change-out frequency. 8 x GAC 10 Inch Coconut shell Carbon Filter Size 9 7/8 inch x 2.5 inch – Fits most standard 10 inch size housings and most reverse osmosis systems. Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water. Thick Wall Coconut Base Carbon Filter Media – 100% coconut shell carbon Designed For maximum contact between the water and carbon. 5 Micron filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operation Temperature: 40°F to 125°F 8 x CTO Carbon Block Filter Size 9 7/8 inch x 2.5 inch Fits most standard 10 inch size housings and most reverse osmosis systems. Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water. 8 x Standard Inline Carbon Cartridges Dimensions: 2 inch x 10 inch – Fits standard Reverse Osmosis Systems – 10 Micron Nominal Removes Chlorine , Bad Taste & Odor ,Turbidity ,Sediment ,THMs and Dirt. Helps to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers Max Flow: 0.5 GPM Max Pressure: 125 PSI Max Temperature: 100°F Inlet/Outlet: 1/4 inch NPTF thread (fitting is required) 1 X Inline Mineral/Infrared/Alkaline Cartridge Dimensions: 2″ x 10″ – Fits all Reverse Osmosis Systems. Filter Service Life 1500 Gallons (5676 Liter) Max Flow: 0.75 GPM Max Pressure: 125 PSI (8.6 Bar) Max Temperature: 100°F Inlet/Outlet: 1/4″ NPT –> 1 X Inline Remineralization Cartridge Dimensions: 2″ x 10″ – Fits all Reverse Osmosis Systems Filter Service Life: 1500 Gallons ( 5676 Liter) Max Flow: 0.75 GPM Max Pressure: 125 PSI (8.6 Bar) Max Temperature: 100°F Inlet/Outlet: 1/4″ NPT –> Total 32 filters, each individually wrapped. Similar Replacement filter Pack with Better Price Pre and post Filter Set: (4 pack): 1 x sediment, 1 x CTO, 1 x GAC, 1 x inline carbon 191729905484 Pre and post Filter Set: (8 pack): 2 x sediment, 2 x CTO, 2 x GAC, 2 x inline carbon 201621502490 Pre and post Filter Set: (14 pack): 4 x sediment, 4 x CTO, 4 x GAC, 2 x inline carbon 322190243744 Pre and post Filter Set: (16 pack): 4 x sediment, 4 x CTO, 4 x GAC, 4 x inline carbon 192369361379 Pre and post Filter Set: (21 pack): 6 x sediment, 6 x CTO, 6 x GAC, 3 x inline carbon 191923460528 Pre and post Filter Set: (24 pack): 6 x sediment, 6 x CTO, 6 x GAC, 6 x inline carbon 191942271603 Filter cartridges should be changed every 6-12 months under domestic conditions. Filter life varies and depends on the water source quality. –> –> –> –>
9 pack Max Water Whole House GAC UDF Coconut Shell Carbon Filter, 20″x2.5″
1 set of replacement filters with following : 9 x GAC UDF Coconut Shell Carbon Filter GAC 20 inch Coconut shell Carbon Filter – Size 2.5 inch x 19 7/8 inch Remove chlorine, turbidity, bad taste & odors, sediment, dirt, and THMS from water. Thick Wall Coconut Base Carbon Filter Media // 100% coconut shell carbon Designed For maximum contact between the water and carbon. 5 Micron Nominal filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operational Temperature Range: 40°F to 125°F Low pressure drop across filter stage. All filters are individually wrapped This Filter pack available with different pack 1 pack 202496881505 2 pack 192718197441 4 pack 192718209637 6 pack 192718219540 12 pack 202496914860 20 pack 202496919555 Total 9 filters, each individually wrapped.
24 Whole House Well Pleated Sediment GAC Coconut Shell Carbon Water Filter
1 set of replacement filters with following : 8 x 5 Micron Pleated Polypropylene Sediment Filter 5 Micron Pleated Polypropylene Sediment Filter – Size 2.5 inch x 9 7/8 inch Fits most standard 10 inch size housings and most reverse osmosis systems. Used to Remove small particles & suspended matter such as silt, rust, sand, algae, sediment, scale particles from water. Meets FDA requirements for food and beverage contact. Cost-effective washable filter. Operation Temperature: 40°F to 140°F High surface area, with a lower pressure drop across cartridge. 8 x Sediment Filter 5 micron Dirt/Rust remover Size 9 7/8 inch x 2.5 inch – Fits most standard 10 inch size housings and most reverse osmosis systems.Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water. Meets FDA requirements for food and beverage contact. No leachable or extractable material to contaminate outflowing water. Long life and increased dirt holding capacity. No surface binders to reduce flow and increase change-out frequency. 8 x GAC 10 Inch Coconut shell Carbon Filter Size 9 7/8 inch x 2.5 inch – Fits most standard 10 inch size housings and most reverse osmosis systems. Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water. Thick Wall Coconut Base Carbon Filter Media – 100% coconut shell carbon Designed For maximum contact between the water and carbon. Filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operation Temperature: 40°F to 125°F Total 24 filters, each individually wrapped.
(4) Big Blue 10″x4.5″ Sediment Whole House + Coconut Shell GAC Carbon Water Filt
1 set of replacement filters with following : 2 x 5 Micron PP Sediment Filter Three-layers structure cartridge, Dual Gradient High contaminant holding capacity.100% PP Polypropylene for compatibility with a wide range of process fluids. 5 Micron, Micro-Denier™ melt-blown filtration fiber, high removal ratings. Formed by thermal bond without use of any binders and adhesives. Certificated by NSF42 and FDA CFR Title 21. (Not printed on the filter label) Maximum operating pressure: 125 PSI Operating Temperature Range: 40-100°F Dimensions: 10 inch x 4.5 inch Maximum Flow Capacity: 1-15GPM* Filters are individually wrapped 2 x GAC carbon Filter GAC 10 inch Coconut shell Carbon Filter – Size 4.5 inch x 9 7/8 inch Removes chlorine, turbidity, bad taste & odors, sediment, dirt, and THMS from water. Thick Wall Coconut Base Carbon Filter Media – 100% coconut shell carbon Designed For maximum contact between the water and carbon. 5 Micron nominal filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operation Temperature: 40°F to 125°F Low pressure drop across filter stage. All filters are individually wrapped. Total 4 filters, each individually wrapped. –> –>
