Detailed Description: Triple Stage 20 Inch x 4.5 Inch Big Blue Heavy Duty Whole House Filter Are you concerned about dirt, odor, color, and bad taste in the cottage lake? Get clean & clear water in your whole house faucets. Perfect for Homes and Cottages Suitable for Municipal and Well Water Applications. 1 inch ports ( inlet Outlet Sizes) // System Water Flow Direction Setup is Right To Left ( Right Inlet – Left Outlet ) Replacement filters for this system. PP Sediment, Iron Manganese, CTO Filters Pack: check ebay item number 192369361388 Filter cartridges should be changed every 6-12 months under domestic conditions. Filter life varies and depends on the water source quality. If you are looking to add a Ball Valve for your system, we have 1″ WH Heavy Duty Ball Valve + 1″ MIP Hex Nipple/Coupling 105363 for 1″ Inlet/Outlet Systems sold separately If you are looking for 3/4″ system, we have bushing thread 105351 to change 1″ ports to 3/4″ ports sold separately Usually we use Whole House Water Filter to deliver safer, cleaner, water to every faucet and shower head in our whole house without drawing down water pressure.Our Whole House Water Filter designed with over-sized filters, housings to maintain the strongest water pressure as much as possible. Larger housings with larger filters require less frequent services, which saves your time, money, and efforts. Manganese Sand is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw water supplies. It may be used in either gravity fed or pressurized water treatment systems. Manganese Dioxide acts as an insoluble catalyst to enhance the reaction between dissolved oxygen (D.O.) and the iron compounds. In ground waters the dissolved iron is usually in the ferrous bicarbonate state due to the excess of free carbon dioxide and is not filterable. It acting as a catalyst between the oxygen and the soluble iron compounds, enhances the oxidation reaction of Fe++to Fe+++ and produces ferric hydroxide which precipitates and may be easily filtered. The physical characteristics of Manganese Dioxide provide an excellent filter media which is easily cleaned by back washing to remove the precipitant. Manganese Zeolite is not consumed in the iron removal operation and therefore offers a tremendous economic advantage over many other iron removal methods. Other advantages of Manganese Dioxide include; long material life with relatively low attrition loss, a wide temperature performance range and extremely high removal efficiency. Negligible labor costs are involved because Manganese Dioxidedoes not require chemicals for regeneration, only periodic back washing is required. Recycle of regenerant and rinse water will conserve KMNO4 and rinse waste water This system is designed to provide an easy and effective method of reducing iron from water, which greatly improves the taste of your water as well. This system helps to eliminate the orange and brown stains often found in toilets, sinks, Etc….. It also reduces the possibility of damage to pipes and water heaters and reduces up to 3 ppm dissolved iron. Pre-loaded Filter Cartridges: Clear filter housings help to observe the filters life and determine the exact time to replace it with a new one also the system supplied with 2 gauges which they are good indicators when the filters are clogged with dirt. Vertical Hydraulic Gauge * The first pressure gauge read your incoming feed water pressure (your city water or well water pump pressure) * The second gauge read unit internal pressure. Both gauges indicate when to replace the filters. When changes in reading start dropping, that is an indication that the cartridges are clogging with dirt and the water inside the system can’t pass through smoothly. Removes/Reduces: Sediment (silt, dirt, rust ETC.) Iron Manganese Hydrogen sulfide Sulfur Rotten egg smell Pesticides Bad tastes & odors Giardia Cysts Chlorine Turbidity Herbicides VOC (volatile organic compounds) THMs MTBEs Includes: 1 X 20 inch x 4.5 inch transparent clear filter housing with double o ring, pressure release button, brass ports + 1/8″ pressure gauge hole. 2 X 20 inch x 4.5 inch Big Blue filter housing with double o ring, pressure release button, brass ports + 1/8″ pressure gauge hole. 2 X Pressure Gauges Size 60MM , Range 10 Kg/psi, Indicate your filter changes when the inlet & outlet water pressure readings are not equivalent. 1 X 5 Micron PP spun Sediment filter. 1 X 10 Micron 20 inch x 4.5 inch Sediment Pleated filter. 1 X 20 inch x 4.5 inch Iron Manganese filter. 1 X 20 inch x 4.5 inch CTO Activated Carbon Block Filter 1 X Filter Wrench 1 X three stages Metal Wall Mounting Bracket 1 Year Limited Manufacturer’s Warranty Specifications: Sediment Filter Life Approx – 6 – 12 months. Carbon Filter Life – Minimum 20,000 – Maximum 35,000 Gallons Less than 1 psi pressure drop @ 20 GPM Maximum recommended operating pressure: 90 PSI Operating temperature: 40-100°F (5-40°C) Dimensions: 27.5 inch height x 24.5 inch width x 8 inch depth Weight: Approx 42 lbs. Feed water pH range: 4.0-10.0 Preferable feed water pressure range: 50-90PSI to get the best filtration results keeps it less than 60PSI. Maximum feed water TDS: 2000PPM Flow Rate (GPM) 1-40* GPM for 1 inch Inlet/Outlet 1-35* GPM for ¾ inch Inlet/Outlet *Pressure drop will be determined based on feed water pressure, filter cartridge, fluid viscosity, filter life and conditions. Applications: Electroplating, etching & image development process in PCB industry Filtration of electroplating fluid in conventional electroplating industry Pre-filter of DI & RO water filtration system for industry Filtration of low viscosity fluids of chemical Filtration of water for manufacturing processes & recycled water Approximate Life of Iron/Manganese Filter Cartridge: Filter life depends on the contamination level (iron equivalent) and amount of water consumed on a daily basis. You can use the following chart to estimate how long a filter will last in your case. «Iron Equivalent» is calculated as follows: (Iron level) + (2 x Manganese level) + (3 x Hydrogen sulfide level) If you are not sure about your Hydrogen sulfide level (it is hard to accurately test for) and you have a noticeable rotten egg odor, assume a Hydrogen sulfide level of 0.5 ppm. If the rotten egg odor is severe, assume a level of 1.0 ppm. Example: Test results are 0.8 ppm iron, 0.2 ppm manganese, and you have a rotten egg smell in your water. Iron Equivalent = (0.8) + ( 2 x 0.2) + (3 x 0.5) = 2.7 NOTE: Some water supplies contain tannins with the iron, if you have only tannins without iron in your water supply, please let us know so we can include a different media filter type. Manganese Sand is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw water supplies. It may be used in either gravity fed or pressurized water treatment systems. Manganese Dioxide acts as an insoluble catalyst to enhance the reaction between dissolved oxygen (D.O.) and the iron compounds. In ground waters the dissolved iron is usually in the ferrous bicarbonate state due to the excess of free carbon dioxide and is not filterable. It acting as a catalyst between the oxygen and the soluble iron compounds, enhances the oxidation reaction of Fe++to Fe+++ and produces ferric hydroxide which precipitates and may be easily filtered. The physical characteristics of Manganese Dioxide provide an excellent filter media which is easily cleaned by back washing to remove the precipitant. Manganese Zeolite is not consumed in the iron removal operation and therefore offers a tremendous economic advantage over many other iron removal methods. Other advantages of Manganese Dioxide include; long material life with relatively low attrition loss, a wide temperature performance range and extremely high removal efficiency. Negligible labor costs are involved because Manganese Dioxidedoes not require chemicals for regeneration, only periodic back washing is required.