PP Cotton Stainless Steel Filter Filter shell is 304 stainless steel, the internal filter core is 5 micron PP cotton material, no power supply, complimentary pressure gauge real-time monitoring pressure, reserved sewage outlet regularly discharge sewage. PP cotton filter is made of polypropylene resin as raw material, which is wound and bonded by the fiber itself. The filter element has the structure of thick outer fiber, thin inner fiber, loose outer layer and tight inner layer. From the outside to the inside filtration, the closer to the inner layer of the filter, the smaller the aperture, the higher the filtration accuracy. Product Parameter: Model 5 Filter Element Flow 3-4T/H Size φ200*455mm Pressure ≤0.6Mpa Thickness 1.0mm Intake height 170mm Material SUS304 Outlet height 50mm Inlet and outlet size DN25(1″Internal thread) Sewage outlet height 105mm Scope of application: Advantage: 1.High filtration accuracy and uniform filter element aperture. 2.The filtration resistance is small, the flux is large, the pollution intercepting ability is strong, and the service life is long. 3.The filter material is clean and pollution-free to the filter medium. 4.Resistant to chemical solvents such as acid and alkali. 5.High strength, high temperature resistance, the filter element is not easy to deformation. 6.Low price, low operating cost, easy to clean, the filter element can be replaced. Please choose one size !! On May 27, 2024 at 02:05:39 PDT, seller added the following information: